Enable USB debugging on Download Mode /Without going to settings (Samsung)
You probably have tried for one reason or for another to enable USB debugging on your device but you can’t access to settings.
We have tutorial about Bypassing latest FRP patch on all Samsung device (Except latest models) and part of the process is to downgrade first and then follow the instructions.
Well, here we have the instructions for enabling USB debugging without need to go to settings > Build number.
First, you will need to download this tool : ADB Enabler Automator. (Click here to download)
Second thing you’ll need to download is your device Firmware. For this you need to search on google.
“Example, in my case I have Samsung Galaxy S6 Edge+ SM-G928F and I need to google Search : Download SM-G928F firmware android 6.0”
Third Thing, you should download odin software on your PC (Click here to download ODIN)
Once you have done that turn off your device completely and Put your device in Download mode using : “Power button + Volume down button + Home button” in same time.
After this, run “ADB Enabler Automator” software on your computer.
In the input select your firmware and in output select the final firmware destination.
After this you are ready to flash with Odin.
Instructions You shouldn’t ignore:
- Extract (unzip) the firmware file
- Download Odin v3.11.1
- Extract Odin ZIP file
- Open Odin v3.11.1
- Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add the firmware file to AP / PDA
- Make sure re-partition is NOT ticked
- Click the start button, sit back and wait few minutes